|
- Home
- About
- Products
Pressure / Process Sensors
UNIK 5000 - Pressure sensing platform
- Ranges from 70 mbar (1 psi) to 700 bar (10,000 psi)
- Accuracy to ±0.04% Full Scale (FS) Best Straight Line (BSL)
- Stainless Steel construction
- Hazardous Area certifications
- mV, mA, voltage and configurable voltage outputs
- Multiple electrical and pressure connector options
The UNIK 5000 is a high performance configurable solution to pressure measurement.
PTX/PDCR 1830 Series - Depth and Level Pressure Sensors
- Ranges from 0.75 mH20 to 600 mH20
- Accuracy ±0.06%
- Fully welded 17.5 mm titanium construction
- Integral lightning surge arrestor
- Polyurethane and hydrocarbon resistant cables
- Full range of installation accessories
- 5 year anti corrosion warranty
The PDCR 1830/1840 transducer (mV output) and PTX 1830/1840 transmitter (4-20 mA output) are the latest generation of fully submersible high performance sensors for measurement of hydrostatic liquid levels.
LPX 1000 Series - Differential Pressure Transmitter
- Ranges ±0.1 to ±30 inH2O (0.25 to 70 m bar)
- Accuracy: ±0.5% FS BSL (±0.25% FS optional)
- Long term stability: > ±0.5% FS / Year
- Calibration certificate option
- Wet/wet differential pressure
- User accessible damping
- Unidirectional or bidirectional operation
- Current or voltage output
- Easy to calibrate “in-situ” with front calibration access option
The LP 1000 Series wet/wet differential pressure transmitter is ideally suited for use in clean room HVAC monitoring and control.
8000 Series - High Accuracy Resonant Pressure Sensor
- High Precision, ±0.01% FS over compensated
temperature range - High Stability, ±100 ppm FS/year
- Wide temperature range, -40°C to +85°C (-40° to 185°F)
- Media isolated construction, suitable for use in harsh environments
- Multiple Output configurations, RS-232, RS-485,
Frequency & Diode (TTL)
8000 Series High Accuracy Resonant Pressure Sensor raises the bar in precision pressure measurement and is the first product to incorporate the new TERPS technology
PM620 TERPS - High Accuracy Pressure Modules
- Total uncertainty from 0.0125% FS
- Temperature compensated accuracy from
-10°C to 50°C (-14°F to 122°F) - Simple screw fit – hand tight no tools required
- Ranges from 1.2 bar to 100 bar (17.5 psi to 1500 psi)
- Compatibility with pressure calibrators such as DPI612 and DPI620G/DPI620G-IS series
- Safe and Hazardous area versions available
- Fully interchangeable with no need for set-up or calibration
Druck’s PM620 TERPS is the latest development in resonant silicon pressure sensor technology incorporating a number of key innovations to allow pressure re-ranging of compatible equipment. A simple screw fit makes both the pressure and electrical connections without the need for tools, sealing tape, cables or plugs and digital characterisation allows interchangeability without set-up or calibration